Myra

Our next guild meeting will be Saturday, July 8, 2017 from 1:30-4:30 p.m. in the Contemporary Arts Center at the fairgrounds.

This is Inchie month, with a theme of Summer.

The always entertaining Chris Crossland and her trusty sidekick Karen Humphries will lead us in creating a patriotic eagle & shield pin/pendant, so appropriate for July!

Supplies:

• Bake & Bond
• Mica powders: Pearl-ex Pearl White, Aztec Gold, Sunset Gold
• Glue-on bail for later 

Tools: 

Your favorite tools and:

• Needle tool
• Christi Friesen’s WIA tool (or whatever you use to sculpt)
• Size “0” knitting needle
• X-acto® or craft knife with sharp blade
• Kemper Star cutter 3/8″ (if you don’t have it, we will cut the 3 stars for you)
• Extruder with a 1/8″ round disc
• PJ’s Smooth Hair texture sheet

Clay Colors

These colors of clay are used to make the colors we will be using in class: White, Pearl, Cad Yellow, 18K Gold, Cad Red, Navy (or Ultramarine Blue and Black to make Navy clay)

Color Recipes for class:

To save time during the meeting, it is suggested that the following colors be mixed and/or conditioned ahead of time:

• White mix:  1/2 block White + 1/4 block Pearl
• Beak mix:  1/8 block Cad yellow + 1/8 block 18K Gold
• Shield trim & backing:  1/2 block 18K Gold
• Shield stripes:  1/4 block Cad Red
• Blue Shield Top:  1/4 block Navy (if you don’t have Navy clay, mix 1/4 block Ultramarine Blue + 1/16 block Black)

Our next guild meeting will be Saturday, June 10, 2017 from 1:30-4:30 p.m. in the Contemporary Arts Center at the fairgrounds.

Penni Jo and Jane will lead us in this fun class. To make this project, please keep your different scrap colors separate from each other. We will be rolling each separate color into a series or rolls and doing something special to each roll before assembling the cane.

This original and unique class was inspired by a TV show about beautiful jewels created from dried and dyed heather. Their technique creates beautiful, gleaming, ‘stonelike’ cabochons called Heathergems®.

We have re-created this look using scraps of polymer clay.

This polymer clay class will allow the student to create Heathergem-inspired “Scrappy PenniJoGems” cabochons & beads from leftover clay. Since most people work with their favorite colors, the Scrappy PenniJoGems usually come out quite appealing and unique to the artist.

These beautiful cabochons are wonderful for earrings, pendants, bracelets, hair barrettes, home décor and more.

To speed up your work, condition your scraps before coming. Do not mix up your colors, just soften each individual scrap of clay so that each scrap can be rolled into a roll in class. Keep your scraps of clay separated as much as possible before coming to class as we will be rolling each separate color or blend into a series or rolls and then do something special to each roll before assembling.

Materials:

• Polymer Clay: Good clay scraps, at least two to three ounces. Or, any mix of your favorite colors. Skinner Blends, Metallic and Pearl or Metallic scraps work very well. Even old canes can be used.
• “Junk” clay to make the cabochon backing.
• Rigid tissue blade for cutting slices.
• Heavy body acrylic paint. Black, dark brown, dark blue or dark purple (We’ll have some in class to use)
• Clay tools and favorite tools
• Newspaper or other paper on which to paint.
• If a shiny finish is desired, polymer clay friendly varnish and brushes for polymer clay.
• Cabochon Molds or cutters (need plastic wrap for curved edges)

Optional:

• Pasta Machine
• Embossing powders, dark colors of your choice. (these can add bits of sparkle or texture.)
• Mica powders, iron on Jewels if you wish to add jewels to your designs.
• Findings for cabs
• Elastic cord for Tile Bracelet

Teachers will bring:

• Wax paper/aluminum foil
• Cabochon Molds
• Cutters
• Saran or Glad Wrap

Project Ideas:

• Pendant
• Earrings
• Tile Bracelet (1” cutter ?)
• Stick pin
• Barrette
• Frame Tiles
• Mosiac Focal Designs

Penni Jo has provided a handy guide you can download for future reference. Thanks, PJ!!

Our next guild meeting will be Saturday, May 13, 2017 from 1:30-4:30 p.m. in the Contemporary Arts Center at the fairgrounds.

Betty Bolerjack will be presenting our project for this month’s guild meeting. We will be making a handwoven neck wire which can be used in place of a chain when creating a necklace or can be the basis of a more elaborate piece. We will be embellishing it with beads, and will be doing some practice wires to begin with which can be finished with chain to create a necklace, bookmark, or earrings.

 Recommended wire is Artistic Wire or Parawire in your choice of color. Hobby Lobby carries both. They have silver Parawire with the other wire and antiqued colors under the brand name Vintaj which is with the charms. Other dead soft wire will work also. One spool of each recommended gauge of wire should be plenty. The prices range from $3.99 to $5.99 for the Artistic Wire and the Vintaj Parawire. 

 Supplies

• 18ga wire
• 24ga wire (same color as 18ga)
• 20ga or 22ga wire for practice (can be a different color)
• Approximately 12-36 beads of your choice in various sizes for embellishment (can be purchased or made from PC)
• Chain to match your practice wire (optional)

 Tools

• Side or flush cutters
• Chain-nose pliers or bent chain-nose pliers
• Round-nose pliers
• Bail-making pliers (optional)
• Hammering surface or anvil (optional)
• Nylon or rubber hammer/mallet (optional)

 The basic tools for working with wire are the first three which most everyone has, I think, but we will be making limited use of all the tools, so it should be easy enough to share.  If you have the optional items, please bring them and plan to share. 

Our next guild meeting will be Saturday, March 11, 2017 from 1:30-4:30 p.m. in the Contemporary Arts Center at the fairgrounds. Our lesson will be different than announced at the last meeting – Deb Hart will be showing us how to make her adorable chili peppers!

Materials

• Skinner blend – Shaped into block that is 3/4″ wide across the face. Something with dark on one end and light on the other (green, red, orange or whatever color you want). Deb used a fun purple blend in her tutorial that turned out very pretty. You can bring canes to embellish your chili pepper – like the cane we created for the owl earrings – otherwise, she’ll have some available for folks to use.
• Canes for embellishment (optional)
• A small amount of scrap clay
• Poly Paste
• Eye pins
• Ear wires

Tools

• Pasta machine
• Clay blade
• Ruler
• X-acto knife
• Wire cutter
• Round nose pliers
• Pin/needle tool/sharp sculpting tool

It’s not a complicated project, so folks should be able to make their Skinner blends at the meeting. Deb will also have a few blends along that she can make a slice and share with people – it doesn’t take much.

Deb will have a small abridged handout for everyone attending, but if you’d like to order a more detailed copy with instructions on the various canes she’ll be using, you can download a copy for $4. She’ll be putting it up on Etsy and on the written tutorial section of CraftArtEdu.com for $10, so she wanted to make it reasonable for anyone interested. She is still working on finishing the editing, but when it’s done we’ll get the link and share with the guild to order it.

Our next guild meeting will be Saturday, February 18, 2017 from 1:30-4:30 p.m. in the Contemporary Arts Center at the fairgrounds.

This month, we’ll be making miniature succulents, with Almond Eastland as our instructor. Almond will have some extra supplies, and we’re good at sharing, so don’t feel obligated to buy any supplies you don’t have.

Tools

• Pasta Machine
• Work surface
• A container for transporting your unbaked piece, just in case.
• Favorite clay tools, such as:
  • Round miniature cutters (the kind Lori used to sell). These are used to make a bunch of evenly-sized clay balls. You could probably use the tiny leaf-shaped Kemper cutter, too.
  • Ball stylus tools for making indentations in which to plant your succulents.
  • Long straight pin to help place your plants, etc.
  • Small knitting needle
  • Blunt needle tool
  • X-Acto knife

Supplies

• Tiny clay pots – about 1″ tall (Almond will bring several in a few different sizes) and, if desired, a little bit of foil with which to texture the soil and pack the pots. Note that you can also make your own planters out of clay, but they need to be pre-baked, so we’re starting with the clay pots in the interest of time.
• PVA glue (such as Crafter’s Pick or Aleene’s Tacky Glue) and your favorite applicator. This is to help make sure the clay sticks to the foil and the foil sticks to the pot.
• Clay glue, such as Kato Poly Paste, Transluscent Liquid Sculpey, Bake & Bond, etc. and and your favorite applicator.
• Small quantities of clay in various colors. This is a great time to use your scrap clay, since succulents come in a variety of colors, and of course, you can always make up your own fantasy succulents! You might like to bring some translucent clay to mix with it, too.
• A little bit of dark brown clay for the potting soil!
• Chalks or artist soft pastels, along with your favorite applicators.
• Baby wipes or alcohol wipes.